20091018
Released H-JTAG V1.0 Preview (Build 20091008)
1 - Stopped the support to LPT, released pesonal H-JTAG USB emulator;
2 - Added the support to PXA3XX series (need to use enhanced H-JTAG USB emulator);
3 - Added the support to NXP LPC17XX CORTEX-M3 series;
4 - Added the support to ATMEL SAM3U CORTEX-M3 series;
5 - Added the support to enable read protection for STM32F series;
6 - Added the support to the programming of CORTEX-M3 + NOR FLASH;
7 - Added the support to KEIL/MDK4.0;
8 - Modified the set of initial PC when debug under KEIL/MDK;
9 - Upgraded H-Flasher and all the drivers to support the build of bad block table and relocation table;
10 - Upgraded H-Converter to support the swap of endiness;
11 - Upgraded H-Converter to support the swap of byte sex;
12 - Updated all the drivers for ATMEL NOR flash chips;

2009-05-13
Released new version H-JTAG V0.9.2 (Build 20090425)
1 - Improved the support to KEIL, the AGDI is used to replace RDI
2 - Added the support to the debugging of CORTEX-M3 under KEIL
3 - Added the support to the programming of NAND flash (Expandable)
4 - Added the support to the unlock of Luminary debug port
5 - Improved the speed of auto flash download
6 - Updateed some flash IDs
7 - Changed the configuratoin of security bit of AT91SAM7 series
8 - Added a new option to skip flash id check
9 - Improved the support to Vista
10 - Included some commom H-Flasher configuration files in the package



2009-02-25
Released new version H-JTAG V0.9.1 (Build 20090218)
1. Updated the flash ID of AT91SAM7S512;
2. Added a new target ID for ARM946E-S;
3. Added the programming support to SST39VF3201;
4. Added the programming support to EON Nor Flash;
5. Updated the flash ID of LPC2387;
6. Updated the programming driver for LPC2300 and LPC2400;
7. Added the display of current TCK speed in H-JTAG server;
8. Fixed a bug in H-Flasher, which may lead to incorrect check of programming addres;
9. Added the history record of programming address and source file;
10. Included H-Flasher Lite, which is same as H-Flasher but without the support to auto flash download. User now can run two instances with different configuration files.

2009-01-24
Released new version H-JTAG V0.9.0 (Build 20090108)
1. Support USB based H-JTAG emulator;
2. Updated the flash drivers of LPC2300;

2008-12-12
Released new version H-JTAG V0.8.1 (Build 20081210)
1. Corrected a bug introduced in V0.8.0, which affects the conversion from HEX to BIN;
2. Updated the fladh drivers for LM3S series;

2008-11-15
Released new version H-JTAG V0.8.0 (Build 20081105)
1. Corrected a bug introduced in V0.7.0, which affects the programming of LPC2300/LPC2400;
2. Corrected a bug introduced in V0.7.0, which affects the programming of AT91SAM7S;
3. Corrected the checking of flash ID in 8-bit mode;
4. Corrected several INTEL flash IDs in the flash device description files;
5. Upgraded the flash driver for STR7 and STR9;
6. Upgraded the INTEL flash driver. Now, auto unlocking is included;
7. Added the programming support to ST NOR flash chips;
8. Added the programming support to AT91SAM9EX;
9. Added the support to customized the delay after a reset;
10. Released a new converter, which can show the basic information extracted from HEX/ELF;

2008-09-21
Released new version H-JTG V0.7.0 (Build 20080915)
1. Updated all the flash drivers for NOR flash;
2. Fixed a bug for the debugging of CORTEX-M3. This bug may affect the debugging when XPSR is not set appropriately;
3. Added the programming supports to all the Cortex-M3 chips from Luminary and ST;
4. Added the programming support to STR7 and STR9;
5. Added the programming support to XSCALE + NOR FLASH;
6. Added the prgrammming support to INTEL NOR FLASH;
7. Added the programming support to muti-chip;
8. Added the verify button for manual verification;

2008-07-20
Released new version H-JTG V0.7.0 BETA (Build 20080720)
1. Added the support to CORTEX-M3;
2. Supported the programming of on-chip flash for CORTEX-M3 based chips;
3. Added the support to XSCALE PXA210/250/255;
4. Corrected a bug in H-Converter on addressing;
5. Moved the management of Vector Catch to H-Jtag server;
6. Some updates on the GUI;
7. Added some options in H-Flasher to support reset and 2nd verification;
IMPORTANT NOTES:
1 - To debug CORTEX-M3, please use IAR 5.11 and above;
2 - Can't debug CORTEX-M3 with KEIL, because the RDI interface of KEIL is not updated to supported CORTEX-M3;
3 - For STM32F, please configue TAP according to the following picture , otherwise, can't debug;



2008-07-01
Released new version H-JTG V0.6.3 (Build 20080701)
1. Added the support to the programming of LPC2300 and LPC2400;
2. Updated H-Converter, corrected a bug for bin to hex conversion;

2008-05-23
Released new version H-JTG V0.6.2 (Build 20080523)
1. Added the support to the programming of LPC2468;

2008-03-28
Released new version H-JTG V0.6.1 (Build 20080328)
1. Corrected the TAP configuration in user manual;
2. Updated the driver for the programming of LPC2000;
3. UPdated the driver for the programming of AT91SAM;
4. Updated H-Converter to support the conversion from ELF/AXF to HEX/BIN;

2007-12-08
Released new version H-JTG V0.6.0 (Build 20071130)
1. Updated H-Flasher to support read operation
2. Fixed a bug on scripts when target is running in big-endian mode
3. Enhance the support to KEIL, included reset, single stepping and auto-programming
4. Fixed a bug introduced in V0.5.0 by mistake. This bug only affects the debugging of ARM926EJ-S
5. For AT91SAM7 series, now user can choose the base address of on-chip flash during the programming

2007-11-05
Released new version H-JTAG V0.5.0 (Build 20071022)
1. Included the user manual (CN & EN)
2. Added the support to PXA270
3. Updated the flash drivers for LPC2000 to support double flash IDs
4. Updated the flash drivers for AT91SAM7 to support encription (see the H-Flasher options)
5. Added the support to AT91SAM7A3, AT91SAM7S512, AT91SAM7SE512, AT91SAM7X512 and AT91SAM7XC512

2007-04-01
Released new version H-JTAG V0.4.4 (Build 20070401)
1. Added the access to cp15 in RVDS
2. Added delay script for h-jtag and h-flasher
3. Refined the display of h-flasher under different operating systems.
4. Added the support to the programming of some new flashs.
5. Changed the default installation path to ../H-JTAG/

2007-01-30
Released new version H-JTAG V0.4.3 (Build 20070130)
1. Fixed a bug on the debug of ARM926EJ-S. Thank Xiangfeng and Sudarshana for pointing out this.
2. Fixed a bug in H-Flasher, which may cause overflow fatal error. Thank Hui for his help.
3. Corrected the flash ID of AT91SAM7S256.
4. Added the support to the programming of LPC2300. Thank ZLGMCU for providing the ev board.
5. Added the support to the programming of NOR flash from WINBOND.
6. Added the check for updates in H-JTAG. Now, user can use this to check for new version.

2006-12-05
Released new version H-JTAG V0.4.2 (Build 20061205)
1. Updated the drivers for the programming of AT91SAM on-chip flash. More stable and much faster. Thanks the support from MCUZONE.
2. Updated H-FLASHER to support most the NOR flash chips from AMD, SAMSUNG and HYNIX. Thanks the help from YX.

2006-11-15
Released new version H-JTAG V0.4.1 (Build 20061115)
1. Updated H-FLASHER to support all the NOR flash chips from SST.

2006-10-16:
Released new version H-JTAG V0.4.0 (Build 20061015)
1. Improve the support to ARM9E-S and ARM9EJ-S.
2. Add TAP configuration to support complex TAP/JTAG
3. Add the support for initialization script, which can be used for auto initialization
4. Add the programming of NOR flash and AT91SAM. But only a few chips are supported currently. I will upgrade H-Flasher to support more NOR flash chip step by step. The programming of AT91SAM chips may have some  problem. I am looking for some boards for testing. I will correct the problem asap.
5. To debug STR912X, please refer to this TAP configuration: config

2006-07-09:
Released new version H-JTAG V0.3.1 (Build 20060629)
1. Add auto flash download for LPC2000 on-chip flash. When auto-download is enabled, h-jtag server will call h-flasher to download program into on-chip flash automatically. This makes the debug in flash much more convenient.

2006-06-15:
Released new version H-JTAG V0.3.0 (Build 20060615)
1. In H-Flasher, added the calculation of checksum for the programming of LPC2000. For the programming of LPC2000, the content of 0x14 will be revised  automatically to make the checksum of the vector table equal to zero.

2006-06-13:
Released new version H-JTAG v0.3.0 (Build 20060613)
1. Improve the processing of reset. The detection problem in v0.3.0 build  20060610 is fixed. Sorry for the inconvenience casued.

2006-06-10:
Released new version H-JTAG v0.3.0 (Build 20060610)
1. H-Flasher is inroduced. H-Flasher now supports the programming of LPC2000. I will upgrade H-Flasher to support the programming of external NOR flash step by step. Here, I would like to thank ZLGMCU for their support.
2. Please uninstall old version before install this new one.
3. For users of olimex wiggler, please configure JTAG according this picture
4. Instructions for programming LPC2000:
A. Open H-JTAG and H-Flasher
B. In H-Flasher, select target flash in step 1; 
C. Go to step 4;
D. Program/Erase ...

2006-04-02:
Released new version H-JTAG v0.2.1 Beta (Build 20060402)
1. Improved the management of breakpoints (Thank Christophe);
2. Enhanced the support for SWI SEMIHOSTING (Thank nust & bluesky);
3. Improved the support for the debug of exception (Thank ZKR);
4. The flash programmer is still under development, because I am  busy with
something else recently. Sorry!